The short answer
Before You Start Thawing
Before applying any heat, you must locate your main water shutoff valve. Knowing its location lets you stop the water flow instantly if the pipe has cracked. Then, open the faucet that the frozen pipe supplies. This simple step provides a path for steam and water to escape, reducing pressure inside the pipe as the ice melts.
Inspect the frozen pipe carefully for any signs of cracks or bulges. If you see damage, do not attempt to thaw it yourself. Turn off the water at the main valve immediately to prevent flooding. This precaution is critical because applying heat to a compromised pipe can cause it to fail completely and release a large volume of water into your home.
Safe Thawing Methods
The safest way to thaw a pipe is with gentle, indirect heat. A common household hairdryer is an excellent tool. Move the dryer back and forth along the pipe, starting from the faucet side and working toward the frozen area. This direction helps melt water toward the open faucet, preventing pressure buildup that can cause a rupture.
- Use a hairdryer on a low setting, moving it constantly.
- Wrap the pipe with towels soaked in hot water.
- Place a portable space heater nearby, but keep it at a safe distance.
- Install UL-listed heat tape according to the product directions.
- Never use a blowtorch, propane heater, or any open flame.
- Avoid using a kerosene heater, which poses a severe fire risk.
What to Avoid During the Process
Never use a blowtorch, propane torch, or any device with an open flame. The intense, concentrated heat can damage the pipe, cause a fire, or even boil water inside, creating dangerous steam pressure. It also poses a significant burn risk to you and could ignite nearby building materials like wood studs or insulation.
Avoid using a heat gun on its highest setting, as it can get too hot. Do not leave any heating device unattended. If you are using an electrical appliance, ensure your hands are dry and you are not standing in water. Do not attempt to thaw a pipe if you cannot safely reach it, such as inside a wall or ceiling.
If the Pipe Has Burst
If you hear cracking, see water spraying, or notice a bulge that starts leaking, the pipe has likely burst. Your first action is to turn off the main water supply immediately. This stops the flow and limits the amount of water entering your home. Then, turn off electricity to the affected area at the circuit breaker if water is near outlets or fixtures.
After securing the area, call local water damage pros. They have equipment to remove water and start drying. Water from a burst pipe can soak drywall, insulation, and flooring rapidly, which risks structural damage and mold. Your next call should be to your insurance company to report the incident.
Preventing Future Freezing
Prevention is the most effective strategy against frozen pipes. Insulate all pipes in unheated areas like attics, crawl spaces, and garages with foam pipe sleeves. For pipes on exterior walls, consider adding extra insulation to the wall cavity. Letting a trickle of cold water run from faucets during extreme cold can keep water moving and prevent it from freezing solid.
Seal cracks and openings in your home's exterior where cold air can reach pipes. Keep garage doors closed if water supply lines are inside. If you plan to be away during cold weather, never set your thermostat below 55 degrees Fahrenheit. You can also drain your water system by shutting off the main valve and opening all faucets to empty the pipes.
Talk to someone now
Phones are answered 24/7 for Austin and nearby communities.
Call Now (512) 726-0989Frequently asked questions
How can I tell which pipe is frozen?
A frozen pipe often shows little or no water flow from a faucet. You might see frost on an exposed section. Check all faucets; the one with no flow likely connects to the frozen line. Sometimes you hear cracking or see a slight bulge.
What should I do if the frozen pipe is inside a wall?
If the frozen section is inside a wall, do not cut the drywall. Turn up the thermostat and warm the area with a space heater. You can aim a hairdryer at air vents. If flow does not return, call a plumber to locate and fix it.
Does homeowners insurance cover damage from a burst pipe?
Many standard homeowners policies cover sudden, accidental water discharge from a burst pipe. This may include the cost to repair the pipe and the resulting water damage to your home. However, damage from a long-term leak you failed to address is often excluded. Policies vary, and your insurer decides what is covered. Review your policy and report any damage promptly.